Note: this is the stubbed version of module GADTs. Try to figure out how to fill in all parts of this file marked undefined. CIS 552 students should be able to access this code through github. Eventually, the completed version will be available.

GADTs

Today we are going to talk about some of my favorite GHC extensions.

> 
> {-# LANGUAGE DataKinds #-}  -- Allow data to be used in types
> {-# LANGUAGE GADTs #-}  -- Constrain datatypes via indices
> {-# LANGUAGE ScopedTypeVariables #-} -- Bind polymorphic type variables
> {-# LANGUAGE KindSignatures #-}      -- Allow kind annotations on types
> {-# LANGUAGE StandaloneKindSignatures #-} -- Kind annotations like type annotations
> {-# LANGUAGE NoStarIsType #-}        -- Use 'Type' instead of '*' in kinds
> module GADTs where

> import Test.HUnit((~?=),Test)
> import Data.Kind(Type)

Generalized Algebraic Datatypes, or GADTs, are one of GHC's more unusual extensions to Haskell. In this module, we'll introduce GADTs and related features of GHC's type system.

An Untyped Expression Evaluator

As a motivating example, here is a standard datatype of integer and boolean expressions. You might use this datatype if you were defining a simple programming language, such as the formula evaluator in a spreadsheet.

> data OExp =
>     OInt Int             -- a number constant, like '2'
>   | OBool Bool           -- a boolean constant, like 'true'
>   | OAdd OExp OExp       -- add two expressions, like 'e1 + e2'
>   | OIsZero OExp         -- test if an expression is zero
>   | OIf OExp OExp OExp   -- if expression, 'if e1 then e2 else e3'
>   deriving (Eq, Show)

Here are some example expressions.

> -- The expression "1 + 3"
> oe1 :: OExp
> oe1 = OAdd (OInt 1) (OInt 3)

> -- The expression "if (3 + -3) == 0 then 3 else 4"
> oe2 :: OExp
> oe2 = OIf (OIsZero (OAdd (OInt 3) (OInt (-3)))) (OInt 3) (OInt 4)

And here is an evaluator for these expressions. Note that the result type of this interpreter could either be a boolean or an integer value.

> oevaluate :: OExp -> Maybe (Either Int Bool)
> oevaluate (OInt i)  = Just (Left i)
> oevaluate (OBool b) = Just (Right b)
> oevaluate (OAdd e1 e2) =
>   case (oevaluate e1, oevaluate e2) of
>     (Just (Left i1), Just (Left i2)) -> Just (Left (i1 + i2))
>     _                                -> Nothing
> oevaluate (OIsZero e1)   =
>    undefined
> oevaluate (OIf e1 e2 e3) =
>    undefined

Ugh. That Maybe/Either combination is awkward.

> -- >>> oevaluate oe1

> -- >>> oevaluate oe2

Plus, this language admits some strange terms:

> -- "True + 1"
> bad_oe1 :: OExp
> bad_oe1 = OAdd (OBool True) (OInt 1)

> -- "if 1 then True else 3"
> bad_oe2 :: OExp
> bad_oe2  = OIf (OInt 1) (OBool True) (OInt 3)

> -- >>> oevaluate bad_oe1

> -- >>> oevaluate bad_oe2

A Typed Expression Evaluator

As a first step, let's rewrite the definition of the expression datatype in so-called "GADT syntax":

> data SExp where
>   SInt     :: Int  -> SExp
>   SBool    :: Bool -> SExp
>   SAdd     :: SExp -> SExp -> SExp
>   SIsZero  :: SExp -> SExp
>   SIf      :: SExp -> SExp -> SExp -> SExp

We haven't changed anything yet -- this version means exactly the same as the definition above. The change of syntax makes the types of the constructors -- in particular, their result type -- more explicit in their declarations. Note that, here, the result type of every constructor is SExp, and this makes sense because they all belong to the SExp datatype.

Now let's refine it:

> data GExp :: Type -> Type where
>  GInt    :: Int -> GExp Int
>  GBool   :: Bool -> GExp Bool
>  GAdd    :: GExp Int -> GExp Int -> GExp Int
>  GIsZero :: GExp Int -> GExp Bool
>  GIf     :: GExp Bool -> GExp a -> GExp a -> GExp a

Note what's happened: every constructor still returns some kind of GExp, but the type parameter to GExp is sometimes refined to something more specific than a.

> -- "1 > 3 == 0"
> ge1 :: GExp Bool
> ge1 = GIsZero (GAdd (GInt 1) (GInt 3))

> -- "if True then 3 else 4"
> ge2 :: GExp Int
> ge2 = GIf (GBool True) (GInt 3) (GInt 4)

Check out the type errors that result if you uncomment these expressions.

> -- bad_ge1 :: GExp Int
> -- bad_ge1 = GAdd (GBool True) (GInt 1)

> -- bad_ge2 :: GExp Int
> -- bad_ge2 = GIf (GInt 1) (GBool True) (GInt 3)

> -- bad_ge3 :: GExp Int
> -- bad_ge3 = GIf (GBool True) (GInt 1) (GBool True)

Now we can give our evaluator a more exact type and write it in a much clearer way:

> evaluate :: GExp t -> t
> evaluate (GInt i) = i
> evaluate (GBool b) = b
> evaluate (GAdd e1 e2) = evaluate e1 + evaluate e2
> evaluate (GIsZero e1) =
>     undefined
> evaluate (GIf e1 e2 e3) =
>    undefined

Not only that, our evaluator is more efficient [1] because it does not need to wrap the result in the Maybe and Either datatypes.

GADTs with DataKinds

Let's look at one more simple example, which also motivates another GHC extension that is often useful with GADTs.

We have seen that kinds describe types, just like types describe terms. For example, the parameter to T below must have the kind of types with one parameter, written Type -> Type. In other words, a must be like Maybe or [].

Using the StandaloneKindSignatures extension, we can write this kind right before our type definition.

> type T :: (Type -> Type) -> Type
> data T a = MkT (a Int)

The DataKinds extension of GHC allows us to use datatypes as kinds. For example, this type, U is parameterized by a boolean.

> type U :: Bool -> Type
> data U a = MkU

That means that the kind of U is Bool -> Type. In other words, both U 'True [2] and U 'False are valid types for MkU (and different from each other).

> exUT :: U 'True
> exUT = MkU

> exUF :: U 'False
> exUF = MkU

> -- This line doesn't type check because (==) requires arguments with the same types.
> -- exEQ = exUT == exUF

Right now, U doesn't seem very useful as it doesn't tell us very much. So let's look at a more informative GADTs.

Consider a version of lists where the flag indicates whether the list is empty or not. To keep track, let's define a flag for this purpose...

> data Flag = Empty | NonEmpty

...and then use it to give a more refined definition of lists.

As we saw above, GADTs allow the result type of data constructors to vary. In this case, we can give Nil a type that statically declares that the list is empty.

> data List :: Flag -> Type -> Type where
>    Nil  :: List Empty a
>    Cons :: a -> List f a -> List NonEmpty a

Analogously, the type of Cons reflects that it creates a nonempty list. Note that the second argument of Cons can have either flag -- it could be an empty or nonempty list.

Note, too, that in the type List 'Empty a, the type Flag has been lifted to a kind (i.e., it is allowed to participate in the kind expression Flag -> Type -> Type), and the value constructor Empty is now allowed to appear in the type expression List Empty a.

(What we're seeing is a simple form of dependent types, where values are allowed to appear at the type level.)

> ex0 :: List 'Empty Int
> ex0 = Nil

> ex1 :: List 'NonEmpty Int
> ex1 = Cons 1 (Cons 2 (Cons 3 Nil))

The payoff for this refinement is that, for example, the head function can now require that its argument be a nonempty list. If we try to give it an empty list, GHC will report a type error.

> safeHd :: List NonEmpty a -> a
> safeHd (Cons h _) = h

> -- >>> safeHd ex1

> -- >>> safeHd ex0

(In fact, including a case for Nil is not only not needed: it is not allowed!)

Compare this definition to the unsafe version of head.

> --unsafeHd :: [a] -> a
> --unsafeHd (x : _) = x

> -- >>> unsafeHd [1,2]

> -- >>> unsafeHd []

This Empty/NonEmpty flag doesn't interact much with some of the list functions. For example, foldr works for both empty and nonempty lists.

> foldr' :: (a -> b -> b) -> b -> List f a -> b
> foldr' = undefined

But the foldr1 variant (which assumes that the list is nonempty and omits the "base" argument) can now require that its argument be nonempty.

> foldr1' :: (a -> a -> a) -> List NonEmpty a -> a
> foldr1' = undefined

The type of map becomes stronger in an interesting way: It says that we take empty lists to empty lists and nonempty lists to nonempty lists. If we forgot the Cons in the last line, the function wouldn't type check. (Though, sadly, it would still type check if we had two Conses instead of one.)

> map' :: (a -> b) -> List f a -> List f b
> map' = undefined

For filter, we don't know whether the output list will be empty or nonempty. (Even if the input list is nonempty, the boolean test might fail for all elements.) So this type doesn't work:

> -- filter' :: (a -> Bool) -> List f a -> List f a

(Try to implement the filter function and see where you get stuck!)

This type also doesn't work...

> -- filter' :: (a -> Bool) -> List f a -> List f' a

... because f' here is unconstrained, i.e., this type says that filter' will return any f'. But that is not true: it will return only one f' for a given input list -- we just don't know what it is!

The solution is to hide the size flag in an auxiliary datatype

> data OldList :: Type -> Type where
>   OL :: List f a -> OldList a

To go in the other direction -- from OldList to List -- we just use pattern matching. For example:

> isNonempty :: OldList a -> Maybe (List NonEmpty a)
> isNonempty = undefined

Now we can use OldList as the result of filter', with a bit of additional pattern matching.

> filter' :: (a -> Bool) -> List f a -> OldList a
> filter' = undefined

Although these examples are simple, GADTs and DataKinds can also work in much larger libraries, especially to simulate the effect of dependent types [3].

Lecture notes

[1] The OCaml language also includes GADTs. See this blog post about how Jane Street uses them to optimize their code.

[2] When data constructors are used in types, we often add a ' in front of them. This mark tells GHC that it should be looking for a data constructor (like True) instead of a type constructor (like Bool). GHC won't complain if you leave this tick off as long as there is no overloading of data constructor and type constructor names. However, consider [], and (), and (,). These all stand for both data constructors (i.e. the empty list, the unit value, and the pairing constructor) and type constructors (i.e. the list type constructor, the unit type, and the pairing type constructor). So if you are using these to index GADTS, you must always use a tick when you mean the data constructor.

[3] Galois, a Haskell-based company, makes heavy use of these features in their code base and has written up a short paper about their experiences.

CIS 552: Advanced Programming

Fall 2021

GADTs

An Untyped Expression Evaluator

A Typed Expression Evaluator

GADTs with DataKinds

Lecture notes